东方日升新能源股份有限公司
PV module installation and
maintenance manual
RISEN ENERGY CO.,LTD.
主导部门：组件研发中心
Page：NO.15 ,Total 41
5.4. Storage
Do NOT expose the modules to rain or moisture. Store the finished product in a
ventilated, waterproof and dry place.
Do NOT remove the original packaging if the module requires long-distance
transport or long-term storage.
Modules Stacking no more than 1 layers (moisture
＜
85%RH, temperature in the
range from
-40°C to + 50 °C) , see Fig. 5-1.
Fig. 5-1 temporary storage at site warehouse
5.5. Markings on module
Three markings are attached on the module with following information:
Nameplate: module type, nominal power, rated current, rated voltage, Voc, Isc,
certification logo and maximum system voltage, etc.
Current marking: the classification according to the module’s current.
To provide clear information of modules for customers to perform efficient
installation, modules will be sorted according to three current classifications,
which are as follow:
I1
：
Current Classification 1 I2
：
Current Classification 2
I3
：
Current Classification 3
B: Unique bar code for each module. The bar code used by Risen includes 14 digits
