东方日升新能源股份有限公司
PV module installation and
maintenance manual
RISEN ENERGY CO.,LTD.
主导部门：组件研发中心
Page：NO.32 ,Total 41
Fig. 9-4 Horizontal installation of long cable modules
Fig. 9-4 Horizontal installation of long cable modules
Precautions:
1. Pay attention to the direction of the wire when installing the modules. It should be
connected along the wire direction to avoid bending the wire.
2. In order to avoid bad or damaged connection of the cable and connector, the
cable and junction box caused by human factors, affecting the electrical safety or
service life of the product, it is recommended that the force applied between the
cable and connector, cable and junction box shall not be greater than 60N during
the installation, dismantling, maintenance and any other related process of the
Product
10. Electrical Connection
The Direct Current (DC) generated by the PV system can be converted to Alternating
Current (AC) and connected to the public power grid. Different regions may have
different policies, laws and regulations to stipulate the installation and
grid-connection requirements of PV systems. Therefore, during the design,
installation and grid-connection of PV system, please comply with the local policies,
laws and regulations.
PV modules can obtain different current and voltage outputs through series
connection and parallel connection. Read this installation manual carefully before
electrical connection and installation. Please design and connect according to the
current and voltage required by customers. Before connection, please ensure that
the connection part is free from corrosion, and keep it clean and dry.
