Selecting Active Import/ Active Export/ Capacitive/ Inductive/ Apparent
Energy as Limit Output Parameter (see Section 3.2.4.1.2.1) allows the
user select one of the following configurations:
ENERGIZED RELAY
(To Energize the Relay)
DE-ENERGIZED RELAY
(To De-Energized the Relay)
Touch on “ key” will conrm the setting and take back to the
previous screen.
Touch on “ key” will take back to the previous screen.
3.2.4.1.2.2 Energy Count Conguration
3.2.4.1.2.3 Energy Trip Point
This screen is used to trip the relay using the energy count.
The relay trips after the lapse of “ON Delay” time (see Section
3.2.4.1.2.4) from the moment the energy count reaches the value of
Energy Trip Point set by the user in addition to its value at the
moment the Energy Trip Point is set.
Example: if the value set for Energy Trip Point is 888 and the
value of the corresponding parameter at the moment this value is set
is 1077, then the relay will trip after x sec of the moment the value of
the parameter becomes 1965 (= 1077 + 888), where x is the ON
Delay (see Section 3.2.4.1.2.4).
Caution:Once the relay has tripped, then to reactivate the Energy Tripping function,
the user has to either reset the energy or re-enter the energy count.
ENTER
BACK
Here 0 to 9 digit input keypad is provided to set the Energy Trip Point
& user can confirm this value with a simple touch on “ key”. and
cancel the change by touching the “ key”.
The valid range is 10 to 9999999.
If value outside this range is entered, it will display “INVALID VALUE”
followed by correct range of parameter.
ENTER TRIP POINT
RELAY-1 TRIP POINT
INVALID VALUE
RELAY-1 TRIP POINT
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
CT SECONDARY
5 AMPERE
1 AMPERE
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
LINE-NEUTRAL VOLTAGE
VL2
VL2
VL2
RELAY-1 CONFIGURATION
ENERGIZED RELAY
DE-ENERGIZED RELAY
OK
BACK
OK
OK
BACK
This screen is used to set the Limit Configuration for Energy Count.
28
Summary of Contents for Master 3440iDL 0.2SS
Page 2: ......