9 - 3
CZ80 / CV860 Rev. .0
CHAPTER 9: CLAMP UNIT
Position-B
3. Clamp Plate Master Clamp Mechanism
The master clamp movement is made after the master is removed from the Drum.
With the activation of the Clamp motor in the forward movement, the Clamp open arm is pushed down
to open the Clamp plate. The Clamp motor stops and waits for the master material.
The Load pulse motor on the Master making unit sends given length of the master material towards
the print drum.
Clamp motor rotates in reverse to close the Clamp plate and stops.
The leading edge of the master is clamped on the Drum.
At that point, the Clamp unit is back to its home position.
RISO Inc. Technical Services & Support
US.RISO.COM
