10 - 3
CZ180 / CV1860 Rev. 1.0
CHAPTER 10: MASTER REMOVAL
Master compression HP sensor (receive)
2) When the Master compression plate is all the way down.
The motor rotates the Master compression plate down, but since the actuator disk is already past
the Master compression HP sensor from the start, the light path of the sensor cannot be blocked
by the disk. The motor stops and then rotates in the opposite direction to raise the Master
compression plate to the horizontal position.
The motor stops and completes the home positioning movement when the actuator disk escapes
from the light path of the Master compression HP sensor.
3) When the Master compression plate is at a halfway position.
The disk is already blocking the Master compression HP sensor.
The motor moves the Master compression plate all the way down until the disk escapes from
the light path of the Master compression HP sensor. The motor stops and then rotates in the
opposite direction to raise the Master compression plate to the horizontal position until the
actuator disk escapes from the light path of the Master compression HP sensor.
RISO Inc. Technical Services & Support
US.RISO.COM
