13 - 22
CZ180 / CV1860 Rev. 1.0
CHAPTER 13: PANEL MESSAGE
Error Type
F21 [Next Original not set on AF for Multi-Up]
Description F21-xxx
To reset dis-
play
Set original on the AF.
Or press STOP key (time-out exists for pressing the STOP key).
Error Point
Error Conditions
032
Next original is not set on AF when multi-up is selected.
Error Type
F05 [Print quantiy under Minimum Print Quantity]
Description
F05-xxx
Enter Print Quantity Over The Programmed Minimum Value
To reset
display
Enter print quantity value over the programmed minimum value.
Error Point
Error Conditions
019
In master making, the print quantity selected is less than the minimum print quantity.
Error Type
F01 [No master on print cylinder (drum)]
Description
F01-xxx
No Master on Print Cylinder (Drum)
Make a New Master
To reset dis-
play
Make a new master with an original.
Error Point
Error Conditions
015
There is no master on the print drum at the start of printing.
Error Type
E02 [Maintenance call]
Description
E02-xxx
!!Maintenance!!
Call Service
To reset
display
Press Reset Key, and also reset the maintenance call value setting by test mode.
Error Point
Error Conditions
011
Master counter reached the value set for the maintenance call (value set by test mode). [The
message appears when either the power is turned ON, the unit is reset, or when the machine
operation ended.]
012
Copy counter reached the value set for the maintenance call (value by set test mode). [The
message appears when either the power is turned ON, the unit is reset, or when the machine
operation ended.]
6) Warning Errors (Exx : Serviceman Call Errors)
7) Warning Errors (Fxx : Others)
RISO Inc. Technical Services & Support
US.RISO.COM
