14 - 4
CZ180 / CV1860 Rev. 1.0
CHAPTER 14: TEST MODE
No.
Data clear
Details
0110
Clearing Jam Status Data
Forcibly clears the jam.
This test mode can be used to temporary clear error display. For acutal
correction of the problem, the cause for the display should be corrected.
Consumables error displays cannot be cleared.
0111
Clearing User Memory
User area memory clear
Initializes data in user area memory to the programming defaults
Record all the settings before the test mode activation.
0112
Clearing Normal Area Test-Mode Data Memory [MACHINE]
Normal area test mode memory
clear for test modes on the
machine.
Initializes all normal area test mode settings on the machine EEPROM to
their programming default values.
The initializing is effective after rebooting the machine.
The protected area test modes stay unchanged.
Record all the settings before the test mode activation.
0113
Maintenance Count Clear (master making)
Maintenance Call master count
clear
Clears the master-making maintenance-call message.
0114
Maintenance Count Clear (printing)
Maintenance Call copy count
clear
Clears the printing maintenance-call message.
No.
Data check
Details
0124 Machine Serial Number 1
Displays the left 4 digits of the machine serial number.
0125 Machine Serial Number 2
Displays the left 4 digits of the machine serial number.
0128 Job Separator connection status
Displays whether there is any Job Separator connection.
0: not connected 1: connected
0129 NIC connection status
Displays whether there is any NIC connection.
0: not connected 1: connected
0130
MCTL PCB program version
display
Displays Mechanical control PCB program version. Example: Displays
"0101" for Ver.1.01
0131 System program version display Displays ROSA program version. Example: Displays "0101" for Ver.1.01
0137
Maintenance Call master-making
quantity display (total quantity at
present.)
Displays the present master-making quantity done from the time the
Maintenance Call setting is initialized.
0138
Maintenance Call print quantity
display (total quantity at present.)
Displays the present print quantity done from the time the Maintenance Call
setting is initialized.
RISO Inc. Technical Services & Support
US.RISO.COM
