2 - 2
CZ80 / CV860 Rev. .0
CHAPTER 2: MACHINE SUMMARY
(7) Master-removal section
(6) Clamp unit
(8) Scanning section
(9) Master-making section
(4) Paper-ejection section
(3) Press section
(5) Print drum
(2) Second paper-feed area
() First paper-feed area
1. Cross-Sectional Diagram
(1) First paper-feed area:
Sends paper from the paper-feed tray one sheet at a time.
(2) Second paper-feed area:
Stops the paper sent from the first paper-feed stage, and accurately feeds it to the print drum and
pressure section.
(3) Press section:
The pressure roller presses the paper firmly against the print drum for printing.
(4) Paper-ejection section:
Removes the printed paper from the print drum using the separator, and sends it to the paper-
receiving tray.
(5) Print drum:
Supplies ink from the ink cartridge to the surface of the print drum for printing.
(6) Clamp unit:
Clamps the leading edge of a master onto the drum.
(7) Master-removal section:
Peels the master from the print drum after use, and discharges it into the master disposal box.
(8) Scanning section:
The original image is scanned on the Auto Document Feeder (AF) unit).
(9) Master-making section:
Transports and creates a master using the thermal print head, then sends the produced master to
the print drum, and cuts the master material.
RISO Inc. Technical Services & Support
US.RISO.COM
