2 - 4
CZ80 / CV860 Rev. .0
CHAPTER 2: MACHINE SUMMARY
4. Master-removal operation
) The clamp plate holding the leading edge of the master opens, and the master-release bar rises
to lift the master out from under the clamp plate
2) The vertical transport rollers and print drum rotate, thereby separating the master from the print
drum and sending it to the master disposal box.
3) The motion of the compression plate starts, pressing the master into the master disposal box.
5. Master-making operation
) The image sensor scans the original, and the thermal print head transfers the image onto a
master.
2) The master is sent into the master stocker room.
6. Master-loading operation
) The leading edge of the master is sent to a the clamp plate on the print drum, and the leading
edge is clamped.
2) The print drum rotates to wind the master around it.
3) The cutter cuts the master.
RISO Inc. Technical Services & Support
US.RISO.COM
