6 - 6
CZ80 / CV860 Rev. .0
CHAPTER 6: PRESS SECTION
C-ring
4. Pressure Roller Assembly
REMOVAL
) Remove the Drum out of the machine and turn OFF the machine power. Then remove following
parts.
Front cover (M3x8 screws; 6 pcs)
Rear cover (M3x8 screws; 5 pcs)
Pressure lever assembly
2) Remove C-ring from both ends of Pressure shaft assembly, and detach Metal bushing from the
both ends. (4mm dia. C-ring; 2 pcs)
3) Slide the Pressure shaft assembly towards to the rear of the machine to free the front end of the
shaft. Then bring the assembly out from the large opening for the print drum.
Adjustment after Assembly
) Pressure lever assembly mounting position adjustment.
RISO Inc. Technical Services & Support
US.RISO.COM
