1 - 6
CZ180 / CV1860 Rev. 1.0
CHAPTER 1: MAINTENANCE
4. Installation location
Do not install the machine in any of the following locations.
(1) Those subject to direct sunlight or any bright location such as by a window (If you must install in
such a location, put a curtain or the like over the window.).
(2) Those where the temperature changes drastically.
(3) Those that are too hot, cold, humid, or dry.
RECOMMENDED:
Temperature range:
15 degrees Celsius - 30 degrees Celsius
Humidity range: 40% - 70% No condensation allowed
(4) Those with radiant heat sources and any locations in the direct path of air from air conditioners or
heaters.
(5) Any poorly ventilated location.
(6) Dusty atmosphere.
(7) Any tilted location.
(Installation height difference: 10 mm max. front - rear, 10 mm max. left - right).
Electrical connection
> Plug the plug securely into the socket so that there is no problem with the contact in the power
supply plug section.
> Do not use any triplets or extension cords.
> Do not allow any other machine to stand on or crush the power cord.
Ground connection
> Always ground this machine to prevent electrical shock in case of an electrical leakage.
RISO Inc. Technical Services & Support
US.RISO.COM
