Advanced Features
Changing the Initial Settings [Custom Setting Mode]
53
08
Semi-Auto
With “ON” selected, if an original exists in the
Original Tray after printing, the next master-making
process is executed followed by proof copy, and then
machine operation is stopped.
Important!:
• If the Auto-Process is “ON”, you cannot set the
Semi-Auto to “ON”.
OFF
ON
09
Job Separation
Select “ON” when using an Job Separator
(option).
OFF
ON
10
Idling
Sets up for idling.
Idling action prevents the machine from printing the first
several pages with faint ink after the Print Drum
(Cylinder) has been exchanged or the machine has not
been used for an extended period of time. Idling action
before the master-making process assures consistent
print quality from the start.
Turn the “Idling” ON to use the idling action of the
machine.
Important!:
• When you turn the “Idling” ON and when the first
master-making has finished, the “Idling” is
turned OFF automatically.
OFF
ON
11
Paper Ejection Adjustment
Change the initial setting for air blow setting.
If printing paper sticks to the print drum (cylinder)
frequently, select a higher level setting.
OFF
Low
Medium High
12
2-Up Printing Paper Size (For CZ180 only)
Set the printing paper size.
A4/
Letter
B4/
Legal
30
Total Quantity Display
The total number of pages printed with the
machine is displayed.
This number is alternately displayed on the two
screens, consisting of an un 3-digit
number and 4-digit number.
Example: If 1,234,567 pages:
_123
→
4567
→
_123
→
4567
Follow steps 1 through 3 of the “Changing Procedure”.
)
p.54
The total number of printed copies is shown on the
Total Quantity Display.
31
Master Quantity Display
The total number of masters generated with the
machine is displayed.
This number is alternately displayed on the two screens,
consisting of an un 3-digit number and 4-digit
number.
Example: If 1,234,567 masters:
_123
→
4567
→
_123
→
4567
Follow steps 1 through 3 of the “Changing Procedure”.
)
p.54
The total number of generated masters is shown on the
Total Quantity Display.
99
Initial Setting Restoration
Reset all Custom Setting mode settings to the
initial settings (factory default).
Follow steps 1 and 2 of the “Changing Procedure”.
)
p.54
Item
No.
Changeable Items
Parameter Selection
0
1
2
3
4
5
CZ180_UG.book Page 53 Wednesday, October 31, 2007 6:19 PM
Summary of Contents for CZ180 Series
