background image

Advanced Features

Changing Default Settings [Admin.]

177

[System]

Auto Idling
Select whether to perform “Auto Idling” when making a 
master after a set period of non-use.
Also selects a period of non-use before initiating “Auto 
Idling”, as well as the number of idle rotations.

• Auto Idling

OFF/

ON

• Non-Use Time

1-

12 hour

• Rotation

1

-3 (times)

Auto Page Renewal
Allows you to set when to recreate a new master. Once 
the specified number of copies is reached, the master 
in use is automatically discarded and a new one 
created.
You can also specify the number of proof copies to 
make after recreating the master.

• Auto Page Renewal

OFF

, ON

• Auto Renewal Point

1-9999 copies (Factory default 
is 1000 copies)

• Sample Copy Output

0-99 copies (Factory default is 
3 copies)

Minimum Print Q’ty
Set minimum number of copies to print.
This prevents master from being made when a smaller 
quantity is entered for printing.

Important!:

• This setting can be locked to prevent alteration. 

Consult your dealer (or authorised service 
representative) for details.

OFF

/ON (2-99 copies)

Stock Management
In order to check current stock quantity, insert the 
number of consumables purchased.

Note:

• When stock quantity falls below the “Remaining Qty 

to be notified”, a message will appear on the display.

• This setting is disabled by factory default.

Consult your dealer (or authorised service 
representative) for details.

• Purchase Qty

0

-99 Pcs.

• Remaining Qty to be notified

0

-99 Pcs.

Beep Sound
Select whether to activate a beep sound when a key/
button is pressed, or when an error occurs.

• ON

Beeps when any key/button is pressed. Beeps when 
an event is caused/completed.

• Limited

Does not beep when keys/buttons are pressed. 
Does not beep when restarting the machine.

• OFF

Does not beep.

OFF/Limited/

ON

Display Access 

Button

Functions

Description

Summary of Contents for MZ770




















































































































































































































































































































Reviews: