Riso MZ790U Instruction Manual Download

Page: 91 / 266

Functions for Master-Making

Printing Side-by-Side on One Sheet [2 Up] [Multi-Up Print]

2 Up Operation

Select a color mode.

Select 1-Color or 2-Color print.

Note:

• See

p.23 for how to select a color mode.

Place an original and load paper.

• When 2-Color printing with 2 originals

p.38

• When printing with 1 color

p.57

Important!:

• Pay attention to the orientation of the original.

For “2 Up”, make sure to place the original as
the diagram demonstrates.
The same is true when using the ADF unit.

Touch [Functions] on the Master
Making Basic Screen.

Touch [2 Up].

Make necessary settings.

Make various settings as needed.
After this, please follow the same operations for
normally making a master and 1-Color and 2-
Color printing.

Press the

key.

Starts scanning of the original.

Summary of Contents for MZ790U











































































































































































































































































Search results

Summary of Contents for MZ790U

Reviews:

Related manuals for MZ790U

Brands by name

Popular brands

Riso MZ790U, Instruction Manual

Search results

Summary of Contents for MZ790U

Reviews:

Related manuals for MZ790U

Brands by name

Popular brands