Selecting the Image Processing Mode [Line, Photo, Duo]
32
Setting up for
Scanning Originals
Selecting the Image Processing Mode
[Line, Photo, Duo]
In order to make a quality master, select an appropriate mode depending on whether originals contain only Line(text)
or photo or both of them.
Press the key to select the Image Pro-
cessing mode.
Each time you press the key, the indicators light in the
order; (Line)
→
(Photo)
→
(Duo)
The table shows which types of originals are appropri-
ate for each mode.
Important!:
• With the Photo mode or Duo mode selected, you can
process images with a dot screening when printing.
(For RZ2XX, unavailable)
• With the Photo mode or Duo mode selected, you
cannot select “Auto” for the scanning level. Perform
manual adjustment.
• You cannot use the Image Processing mode and
Pencil mode together.
Note:
• Select the Pencil mode when printing from an original
written with a pencil or a stamped original.
• The Custom Setting mode allows you to change the
initial setting for the Image Processing mode.
Mode
Type of Originals
Line
Only text contained; e.g.,
word processing file printout,
newspaper
Photo
Only photos contained
Duo
Both text and photos
contained
Basic Operations
Basic Operations
29
9
Remove the printed paper.
Pull and open the Receiving Tray Paper Guides,
and then remove the paper.
Note:
• For RZ2XX, lift the corrugators and pull the
guides open.
Tip:
• Depending on the operation status of the
machine, different Progressive Arrow sections
light or blink.
Progress Arrows
1) Master-making progress arrow
2) Master-making
stop
bar
3) Printing
progress
arrow
4) Printing stop bar
• Arrow 1 blinks and increments by one segment:
Master-making process in progress
• Arrow 3 blinks and increments by one segment:
Printing process in progress
• The stop bar lights: Indicating Stop timing
• Both 1 and 2 light: Master-making process can
be executed.
• Both 3 and 4 light: Printing process can be exe-
cuted.
• Both 1 and 4: In the Auto-Process mode
• The machine halts and halfway arrow seg-
ments blink: A restoration instruction is being
waited.
Riso Kagaku Technical Training Center Version
