Setting up for Scanning Originals
Processing Photos with Dot Screening [Dot Process] (For RZ2XX, unavailable)
34
Processing Photos with Dot Screening
[Dot Process]
(For RZ2XX, unavailable)
This function processes photo originals with dot screening, resulting in clearer printing.
You can select the dot screening pattern from two types.
Press the key to select the type of a
dot screening.
Each time you press the key, the indicators light in the
order;
(COARSE)
→
(FINE)
→
and then OFF.
The table shows the equivalent lpi (line per inch) to
each mode:
Important!:
• You cannot use the Dot Process mode and Line
mode together.
• You cannot use the Dot Process mode and Pencil
mode together.
Mode
Equivalent Lpi
COARSE
53
FINE
106
Setting up for Scanning Originals
Enlarging and Reducing Originals [Enlargement/Reduction]
35
Enlarging and Reducing Originals
[Enlargement/Reduction]
You can enlarge or reduce originals when printing.
Specify the enlargement/reduction ratio by selecting the standard ratios; or specify it in increments of 1%.
Enlarging and Reducing by Standard Ratios
[Standard]
Select the standard ratios when enlarging or reducing standard-sized originals to another standard size or when
increasing margins around the original.
Press the / keys to specify the
enlargement/reduction ratio.
Each time you press the key, the indicator of the
selected ratio lights.
To restore 100%, press the
key.
The standard enlargement/reduction ratios differ
among the models.
Check the panel on your machine.
Riso Kagaku Technical Training Center Version