Automatic Sorting into Groups [Programmed Printing]
50
Advanced Features
Automatic Sorting into Groups
[Programmed Printing]
From a single sheet of original, this function prints and sorts into various groups having different number of copies per
set and/or different number of sets.
Note:
• Up to five groups can be set up, with a maximum of 99 sets and a maximum of 9999 copies in each group.
• The Job Separator (option) is useful for Programmed Printing.
• If you place more than one original in the ADF unit (option) with “ON” selected for “Auto-Process”, the programmed
routine is repeated for each original.
Advanced Features
Automatic Sorting into Groups [Programmed Printing]
51
1
Press the [P] key to turn on its indi-
cator.
The print quantity entry mode is started.
Note:
• To clear the mode, press the
[P]
key again to
turn off its indicator.
If the mode is quitted, the setting is cancelled.
2
Enter the number of copies to be
printed, using the Print Quantity
keys.
Enter the number of copies for the first group.
Note:
• If you enter an incorrect number, press the
[C]
key to clear the number, and then enter the cor-
rect number.
3
Press the [
] key.
The set quantity entry mode is started.
4
Enter the number of set using the
Print Quantity keys.
To set the next group, go to step 5.
To finish the setting and start printing, go to step
6.
Note:
• If you enter an incorrect number, press the
[C]
key to clear the number, and then enter the cor-
rect number.
• If you do not enter a number, 1 is selected.
Riso Kagaku Technical Training Center Version
