Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
58
09
2-Up printing interval time
Change the initial setting for the 2-Up
printing interval time.
None
15
seconds
30
seconds
10
Energy Saving mode
When the machine is not used for a
certain period of time, it is
automatically turned off or placed into
the sleep status.
• OFF
The machine remains on until its
power switch is turned off.
• Auto-Sleep
The machine is usually off but
switched on when data is received.
• Auto-Power OFF
The machine is switched off.
Note:
• It is recommended to select “Auto-
Sleep” with a computer connected
to the machine.
OFF
Auto-
Sleep
Auto-
Power
OFF
11
Energy Saving Mode wait time
Select the waiting period required to
lead the machine into the Energy
Saving mode.
Approx.
5 minutes
Approx.
15 minutes
Approx.
30 minutes
Approx.
60 minutes
Approx.
90 minutes
12
Auto clear time
Select the waiting period required to make
the machine automatically clear settings.
No
Approx.
3 minutes
Approx.
5 minutes
13
Paper finish
If paper is not supplied smoothly with
“Standard” preset, you can use User 1
through 5 to program the paper supply
and output adjustment parameters
suitable of paper to be used.
For details, contact your dealer.
Note:
• User 1 through 5 are not
programmed when the machine is
shipped.
Standard
User 1
User 2
User 3
User 4
User 5
14
Minimum print quantity
Specify the minimum number of
copies to be printed from one master.
If a number lower than the specified
minimum number is entered, the
master-making process is not
executed.
You can lock and prevent this setting
from being changed. For more
information, consult your dealer.
0
10
copies
20
copies
30
copies
40
copies
50
copies
Item
No.
Changeable Items
Parameter Selection
0
1
2
3
4
5
Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
59
15
Beep sound
Specify how an alarm should sound
when keys are operated or errors occur.
• Level 2
A beep sounds at all preset occasions;
for example at the time of key
operations and event generation/end.
• Level 1
A beep sounds only at the time of
error occurrence, setting
completion, pulling-out enabled,
and 2-Up printing interval time.
• Level 0
A beep does not sound at any occasions.
Level 2
Level 1
Level 0
16
Reservation Period
Specify the time for restricting
document data output from a computer
when the machine is not operated.
OFF
15
seconds
30
seconds
60
seconds
17
Semi-Auto(ADF unit) (available only
with the optional ADF unit)
With “ON” selected, if an original
exists in the ADF unit after printing,
the next master-making process is
executed followed by proof copy, and
then machine operation is stopped.
Important!:
• With “ON” selected for Auto-Process,
you cannot select “ON” for Semi-Auto.
OFF
ON
18
Job Separation
Select “ON” when using an Job
Separator (option).
OFF
ON
19
Tray paper size for a
Linked Printer (for
RZ2XX, unavailable)
Change the initial setting
for the paper size to be
output from a Linked
Printer (option).
RZ390/
RZ310
Ledger
Legal
Letter
Statement Folio
Executive
RZ370
A3
B4
A4
B5
20
Print Quantity restoration setting
Set the restoration setting for Print Quantity.
Select “ON” when you want to restore the
Print Quantity after printing is finished.
OFF
ON
21
2-UP printing restoration setting
Set the automatic restoration setting
for 2-Up printing.
Select “ON” when you want to restore the
2-Up printing after 2-Up printing is finished.
OFF
ON
Item
No.
Changeable Items
Parameter Selection
0
1
2
3
4
5
Riso Kagaku Technical Training Center Version
