Setting up for Scanning Originals
Enlarging and Reducing Originals [Enlargement/Reduction]
36
Enlarging and Reducing with the Zoom Function
[Zoom]
(For RZ2XX, unavailable)
Specify the enlargement/reduction ratio between 50% and 200% in increments of 1%.
1
Press the key to select the Zoom
mode.
The current enlargement/reduction ratio is shown
on the display.
2
Press the / keys to select the
enlargement/reduction ratio.
The selected enlargement/reduction ratio is
shown on the display.
key: Each press increases the ratio by 1%.
key: Each press decreases the ratio by 1%.
Note:
• To restore 100%, press the
key or the
key.
Setting up for Scanning Originals
Scanning Originals Written with Pencils [Pencil] (For RZ2XX, unavailable)
33
Scanning Originals Written with Pencils
[Pencil] (For RZ2XX, unavailable)
This function allows clearer printing from such originals containing faint contents as those written with pencils.
Press the
key to turn on its indicator.
Important!:
• You cannot use the Pencil mode and Image Process-
ing mode at the same time.
• You cannot use the Pencil mode and Dot Process
mode at the same time.
• When in the Pencil mode, adjust the scanning level
manually. You cannot select “Auto” (for RZ2XX,
unavailable).
)
p.37
Note:
• To clear the Pencil mode, press the
key again to
turn off its indicator or select another image process-
ing mode.
Riso Kagaku Technical Training Center Version
