Advanced Features
Protecting Confidential Documents [Confidential Mode]
54
Protecting Confidential Documents
[Confidential Mode]
After printing is complete, the master remains on the Print Cylinder(Drum) and is ready for printing another set of
copies.
To protect confidential documents from unauthorized duplication, use the Confidential feature to discard the master
after printing.
1
Confirm that printing has ended.
Printing should be completely finished.
2
Press the
key to turn on its indi-
cator.
Note:
• To clear the mode, press the
key to turn off
its indicator.
3
Press the
key.
The current master is discarded and replaced with
a blank one.
Note:
• After the discard and replacement, the Confi-
dential mode is cleared.
Tip:
If you execute the Confidential mode processing
when the
indicator is on, the machine oper-
ates confidential processing and idling action at
the same time.
Advanced Features
Printing with a Linked Printer (Option) (For RZ2XX, unavailable)
55
Printing with a Linked Printer
(Option) (For RZ2XX, unavailable)
With optional Linked Printer connected, an original is scanned by the machine but printed out by the Linked Printer.
Important!:
• When connecting a Linked Printer, consult your dealer.
• Using a Linked Printer needs some settings to be made.
)
p.63
• Only a single preset size of paper can be output from the tray of a Linked Printer. The Custom Setting mode allows
you to change the initial setting for this paper size. (Initial setting: Letter(A4))
)
p.57
1
Check that the Linked Printer has
been correctly connected and that
the power switches of the machine
and the Linked Printer are ON.
2
Press the [ ] key.
The output destination is switched to the Linked
Printer and “L” is displayed at the left end of the
Print Quantity Display.
Note:
• To switch back to master-making and printing
operations with the machine, press the
[
]
key again.
• When you press the
[
]
key immediately after
the power switch is on, “L” may not appear on
the display. In that case, please wait for a while.
When “L” appears, move on to the next step.
3
Place an original.
z
When placing on the Stage Glass
Open the Stage Cover and place the original
face down. Align the center of the original with
the mark on the left-hand of the glass.
After placing the original, slowly close the
Stage Cover.
z
When placing in the ADF unit
(option)
Place originals face down, and then adjust the
Original Guides to the width of the originals.
Note:
• You can place up to about 50 sheets of orig-
inals in the ADF unit.
Riso Kagaku Technical Training Center Version
