Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
64
5
Repeat steps 3 and 4 to enter an IP
address up to the fourth field.
6
Press the
key.
The IP address setting is completed.
Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
61
Changing Procedure
1
Press the
key to turn on its indi-
cator.
Note:
• To clear the mode, press the
key again to
turn off its indicator.
2
Enter an item number to be changed,
using the Print Quantity keys.
The Print Quantity Display shows the current
parameter setting for the selected item number.
Note:
• For items No. 70 through 72, the operation pro-
cedures differ.
– Item No.70 and 71:
– Item No.72:
• To restore the initial settings for the Custom
Setting mode, enter “99” and press the
[+]
key,
and then press the
key.
3
Press the [
] key.
Pressing this key allows you to select a parameter
number.
The currently set parameter number blinks.
4
Enter a parameter number using the
Print Quantity keys.
If there are more than one item to be changed,
press the
[+]
key, and then repeat steps 2 through
4.
Riso Kagaku Technical Training Center Version
