Replacing and Disposing Consumables
Replacing the Master Roll
68
Replacing the Master Roll
When the entire Master Roll is consumed, the Master Replacement indicator lights. Replace with a new Master Roll.
Important!:
• For the Master Roll, it is recommended to use the products specified by RISO.
1
Open the Front Cover.
2
Check the indicator of the Master
Making Unit Release button is on.
If the indicator is off, press the Master Making Unit
Release button to turn on its indicator.
:Master Making Unit Release button
Note:
• With the Print Cylinder(Drum) pulled out, you
cannot pull out the Master Making Unit. Place
the Print Cylinder(Drum) into position, and then
press the Master Making Unit Release button.
3
Pull out the Master Making Unit.
Grasp the Master Making Unit Handle and pull out
the Master Making Unit until it stops.
4
Open the Master Making Unit Cover.
Grasp the Master Making Unit Cover Lever and
open the Master Making Unit Cover.
5
Open the Master Roll Holder.
Advanced Features
Customizing the Initial Settings [Custom Setting Mode]
65
Setting the Link-free volume
(for RZ2XX, unavailable)
When entered print quantity is smaller than the specified Link-free volume (number of copies), a Linked Printer is
automatically selected for printing. If entered print quantity is equal to or larger than the Link-free volume, the machine
is selected for printing.
1
Press the
key to turn on its indicator.
Note:
• To clear the mode, press the
key to turn off
its indicator.
2
Enter “72” using the Print Quantity
keys.
3
Enter a Link-free volume number
using the Print Quantity keys.
The entered number is shown on the Free Repro-
duction Size Display.
The selectable range is 0 through 99.
Note:
• If you enter an incorrect number, press the
[C]
key, and then enter the correct number.
• The initial setting is “20 copies”.
4
Press the
key.
The Link-free volume setting is completed.
Riso Kagaku Technical Training Center Version
