Troubleshooting
When a Message Displays
238
Printer Temperature is Low
“High Speed” is Not
Available
(Symptom)
When the temperature of use is low, you
cannot use “High Speed”.
(Action)
Use the printer at the normal print speed
until the temperature inside the printer
increases to 15ºC (59ºF) or higher.
When you touch “Continue”, printing at
the normal speed starts.
When you touch “Cancel”, the Printing
Basic Screen appears.
•
When resuming the print job:
Touch
[Continue]
.
(Alternatively, press the
key to
print.)
•
When stopping the print job:
Touch
[Cancel]
.
(Alternatively, press the
key or
the
key to clear.)
Processing Print Data
from PC
Scanning Mode is Not
Available while Process-
ing Current Data
The machine is receiving the document
data from the computer.
While the data is being transmitted,
Scan Mode is disabled.
Touch
[Close]
.
(Alternatively, press the
key to
clear.)
Processing Print Data
from PC
This Function is Not
Available while Process-
ing Current Data
The machine is receiving the document
data from the computer.
While the data is being transmitted,
Scan mode is disabled.
Touch
[Close]
.
Initiate the Print job after the
transmission is complete, or print from
the machine.
-- Protect --
Discard Current Master
(Symptom)
“Protect” function is set to ON.
(Action)
Perform “Confidential” if necessary .
•
To set the “Confidential”:
Touch
[OK]
.
•
To cancel the “Confidential”:
Touch
[Cancel]
.
(Alternatively, press the
key to
clear.)
Reached to the limit count
Contact the administrator
(Symptom)
The upper limit for master-making/
printing set by the administrator was
reached.
(Action)
Contact your Administrator.
Touch
[Close]
.
(Alternatively, press the
key or the
key to clear.)
! Scanning is Not Possible !
External CI is not Connected
or Processing Connection
Check Cable Connection
(Symptom)
The scanning function is unavailable
due to a lost connection with an external
controller or because connection
processing has not finished.
(Action)
Check the connection with the external
controller.
Touch
[Close]
.
(Alternatively, press the
key or the
key to clear.)
Starting Up Network Card
Please Wait a Moment
(Symptom)
RISO Network Card is starting up.
(Action)
Please wait a moment.
Alternatively, print from the machine.
Touch
[Close]
.
(Alternatively, press the
key or the
key to clear.)
Message
Symptom/Action
How to Clear a Pop-Up Message
Summary of Contents for SE 9380
