background image

Advanced Features

Selecting Scanning Sides When Using the Auto Document Feeder DX-1 [Scanning Side -ADF]

156

Selecting Scanning Sides When Using the 
Auto Document Feeder DX-1 

[Scanning Side -ADF]

When scanning originals using the optional Auto Document Feeder DX-1, there are three scanning side options: 
“Front Side”, “Back Side”, or “Duplex”.

Important!:

• If the original is set on Auto Document Feeder DX-1, “Book Shadow” function cannot be used. 

Note:

• The upside when the original is set is “Front Side”.

The set original is scanned sequentially from the top.

• Go to “Admin.” and select “Scanning Side -ADF” to save a frequently used setting as the default.

)

p.167

‹

Front Side -> Simplex

Scans the front side of the original, and prints on one side.

Important!:

• If the “Top Margin” function is used, the setting, “Front Side -> Sim-

plex” must be used.

‹

Back Side -> Simplex

Scans the back side of the original, and prints on one side.

Important!:

• When “Sorter” is set to ON, “Back Side -> Simplex” is automatically 

selected. Place the original face-down.

‹

Duplex -> Simplex

Scans both sides of the original and prints on one side. The front side 
is scanned first and then the back side. “Setting Direction” and “Paging 
Direction” of the original must be specified.

Important!:

• The “Duplex -> Simplex” option is not available in “Program; Multi-

Page Mode” Likewise, if “Duplex -> Simplex” is selected, “Multi-Page 
Mode” is not available.

Note:

• If the original includes blank pages, these will also be scanned and included in copies.

Original

Printed Copies

Original

Printed Copies

Original

Printed Copies

Summary of Contents for SE 9380













































































































































































































































































Reviews: