background image

 

 

 

 

 

 

 

Instruction Manual 

& Operating Guide 

Draft Pro 3

Pig & Lamb Weigher 

Model – 3664G 

 

 

 

Rev B – 17/03/20 

 

Contents:

 

Draft Pro 3 Pig & Lamb Weigher – Model 3664G 

Safety Notes and Warnings ........................................................ 2 

Introduction and Intended use .................................................. 3 

Overview .................................................................................... 4 

Preparation for Use .................................................................... 5 

Maintenance and Lubrication .................................................. 13 

Spare Parts ............................................................................... 14 

 

 

Safety Notes and Warnings 

  Ensure the operator in charge of the weigher is an experienced stock 

person who can maintain a high standard of animal welfare. 

  Ensure that there is sufficient space in the area designated for the 

weigher to allow the operator to work safely and efficiently. 

  If using an adjoining race and pen with the weigher should be of 

sufficient build for the safety of both animals and operators. 

Training 

Do not attempt to carry out any procedure on a machine unless you have 
received the appropriate training or read the instruction manual. 

Retain all instructions in a safe place for future reference. 

 

 

Summary of Contents for Draft Pro 3









Reviews: