DOWN-Arrow
button
UP-Arrow
button
4 Spec. Featr. cont.
Swing
Swing setting determines the temperature difference from
ON to OFF that the thermostat will command the heating/cooling system to run.
With the MODE switch in HEAT or COOL, press the button.
The SET TEMP SWING icon is displayed. The current setting of temp swing is
shown on the display (default at 3 ).
To change the swing, push TEMP UP or TEMP DOWN buttons. The furnace will
cycle more at the lower numbers as it tries to keep your set point constant.
To complete the swing setting, push the HOME button.
Manual
With the MODE switch in HEAT or COOL, push the UP or DOWN
arrow buttons to temporarily change the control temperature by 1
degree per step. Press and hold for faster setting.
The OVERRIDE icon comes on which shows the displayed
temperature may be different from the programmed setting.
The OVERRIDE is canceled at the start of the next time period,
or when the MODE switch is moved, or if TEMP HOLD is pressed twice.
TIME
PG
8
SDP
4 Special Features
The "Special Day Program" can be used when you are unexpectedly home
and need to activate this heat / cooling program just for the day.
With the MODE switch in HEAT or COOL press the SPECIAL DAY button to
activate.
When the SPECIAL DAY Program is active, all other day settings are all
ignored even if the day is matched.
The SPECIAL DAY program will terminate when the mode switch is moved
or if the SPECIAL DAY button is pushed again.
PG
7
SET TEMP
