Operating Instructions
Location and Function of Controls
CAUTION: If you turn off the air conditioner or switch from cooling to
the fan, wait at least 3 minutes before setting to cooling again.
POWER
- Turns air conditioner off.
FAN SPEED "L"
- Low speed fan operation with cooling or not.
FAN SPEED "H
- High speed fan operation with cooling or not.
This automatically controls the temperature of indoor air. Turn the knob so
thatarrow points to the cooler marks for more moderate cooling.
Normal Fan
1. Turn the FAN speed mode switch to the "H" or the "L" setting
2. Set the thermostat control to the temperature mark "FAN only"
Normal cooling
1. Turn the FAN speed mode switch to the "H" or the "L" setting
2. Set the thermostat control to the desire temperature (the mid-point is a good
starting position).
If the room temperature is not satisfactory after a reasonable time, adjust the
control to a warmer setting, as appropriate.
Maximum cooling
1. Turn the FAN speed mode switch to the "H" setting
2. Set the thermostat control to the cooler temperature mark.
Quieter operation
1. Turn the FAN speed mode switch to the "L" setting
2. Set the thermostat control as needed.
Owner's Manual
15
Operating Instructions
ENGLISH
Summary of Contents for HW500CM
Page 11: ...min H S I L G N E...
Page 12: ...12 Room Air Conditioner Installation...
Page 23: ...23 23...
