用户手册
(Manual)
50
Performance of cabinet parameters
Description of cabinet
Cabinet internal equipment installation height
：
2000 high cabinet 42U, 2200 high cabinet
47U
；
Color of cabinet
：
RAL 9005 sandtxt;
Surface treatment
：
doors
、
top panel
、
side panel
：
epainting
，
The surface spraying
thickness reached 70-130µm
，
The hardness of the surface is greater than 2H
，
Spraying
adhesion to achieve level 0 international standard
，
frame is only ecoated in ral9017;
Cabinet plate material
：
En10130-DC01;
The load of the cabinet.
：
No less than 1000 kg.;
Cabinet front: Configuration1
：
Single vented door
，
The ventilation rate is not less than 78%
，
The door is equipped with four point lock rod
，
comfort handle and safe insert
，
The front
door open Angle no less than 130 °
。
Configuration2
：
Single glassed door
，
The door is equipped with four point
lock rod
，
comfort handle and safe insert
，
The front door open Angle no less than 130 °
。
Cabinet Rear
：
Configuration1
：
Double vented door, The ventilation rate is not less than 78%
，
The door is equipped with three point lock rod
，
crank lock handle and safe insert
，
door open
Angle no less than 130 °
Configuration2
：
Single door, The door is equipped with four point lock rod
，
comfort handle and safe insert
，
The door open Angle no less than 130 °
。
Configuration3
：
Rear panel
。
Each cabinet is equipped with two pairs standard 19inch mountine angles
，
the Position can
be moved back and forth
，
the width of the installation mounting angle is 465.1MM
，
Each
"U" position is marked with a silk screen
，
The mounting angle process is DC01+ecoat
，
600
width cabinet equipped with one pair depth stay
，
800 width cabinet equipped with top and
bottom mounting angle bracket
。
Summary of Contents for 1194453
