Rittal Liquid Cooling Package
49
9 Operation
EN
Fig. 57:
"Details" screen
The following information is displayed on the "Details"
screen
– 3 x server outlet temperature of sensors (server-out)
– 3 x server inlet temperature of sensors (server-in)
– Speed of individual fan modules as a % of maximum
speed (rpm)
– Water inlet and return temperature in °C
– Actual setting of control valve
– Cooling water flow rate in l/min
Fig. 58:
"Water Info" screen
The following information is displayed on the "Water
Info" screen
– Cooling water flow rate in l/min (waterflow)
– Actual setting of control valve
– Water inlet (water in) and water return (water out)
temperature in °C
Fig. 59:
"Air Info" screen
The following information is displayed on the "Air Info"
screen
– 3 x server outlet temperature of sensors (server-out)
– 3 x server inlet temperature of sensors (server-in)
Fig. 60:
"Settings" screen
The following selection options are available on the
"Settings" screen:
– Door opening (with installed option "Automatic door
opening")
– Setpoint
– Fan registry
By selecting one of the points, a new screen page will
open.
Fig. 61:
"Doors" screen
The number of defined door exits is shown on the
"Doors" screen. By selecting an entry, e.g. "Door 1",
the door magnets on this door output are deactivated
for 10 seconds and the door opens. Once this period
has expired, the magnet is re-energised.
Note:
In order to prevent access by unauthorised
individuals, access to setting options for the
server inlet temperature setpoint and open-
ing of the doors may be blocked. Further in-
formation may be found in section 8.2.4 "LCP
configuration".
