Important Safety Instruction
UPS-Manual
4
EN
13. Always switch off the UPS and discon-
nect the batteries when relocating the
UPS.
14.
It should be recharged every 2-3
months if unused. If this is not done,
then the warranty will be null and void.
When installed and being used, the
batteries will be automatically recharged
and kept in top condition.
15. Make sure that the AC Utility outlet is
correctly grounded.
16. Please ensure that the input voltage of
the UPS matches the utility supply volt-
age. Use a certified input power cable
with the correct plugs and sockets for
the appropriate voltage system.
17.
Use only genuine or recommended
parts and accessories. The use of other
parts can void the liability for any re-
sulting consequences.
1.5. Proper
Use
This UPS is designed for providing power to IT
systems. A use different from that described
here is considered to be an improper use. Rittal
cannot accept any liability for damage resulting
from the improper use or the non-observance
of this guide. The guides for the used accesso-
ries may apply.
Rittal prohibits the use for life-preserving appli-
cations (such as the use in hospitals or the di-
rect patient care). Rittal expressly does not sell
its products for such applications. Rittal will not
accept any responsibility if a UPS is used in
this area.
1.6. Storage Instructions
For extended storage in moderate climate, the
batteries should be charged for 12 hours at 3
month intervals by connecting the UPS to the
utility supply and switch on input breaker lo-
cated at UPS rear panel. Repeat this procedure
every 2 months if the storage ambient
temperature is above 30
°
C.
