6.
Remove the system from the cabinet.
7.
Place the system on a fixed, stable surface.
8.
Loosen the screws on the front and rear cover.
9.
Remove the earthing plugs from the front and rear cover (Fig. 89).
10.
Remove the earthing screw (Fig. 90/1) from the tank.
11.
Push out the red arrest (Fig. 91/2) at the ignition plug with a small screwdriver
12.
Pull out the ignition plug.
13.
Loosen the electrical connection (Fig. 92/1) of the loss monitoring.
Fig. 89: Earthing plugs
Fig. 90: Earthing screw
Fig. 91: Ignition plug
Fig. 92: Connection loss monitoring
Maintenance
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US
113
