In the state of an event, the most current pending message is shown in the display
1 Number of the message = number of
the currently pending messages
2 There are other older messages
present which can be retrieved using
the
[Up]
button
3 Message text
4 Date and time of the event
Scrolling through messages
If there is more than one message present, the individual messages can be seen by
using the arrow buttons (
[Up]
and
[Down]
) (scroll). A symbol then appears in the
message display which signals that there are still other, more recent, events present
that the one currently displayed (Fig. 67).
1 Number of this message
2 There are other older messages
present which can be retrieved using
the
[Up]
button
3 Message text
4 Date and time of the event
5 There are other more recent messages
present which can be retrieved using
the
[Down]
button
If no further input occurs in this state for 30 seconds, the display changes automati-
cally into the basic state of the message display (display of the most recent mes-
sage).
Control menus
If the control panel is in
“Message display”
state, activation of the control menu
occurs through simultaneous actuation of the arrow buttons (
[Up]
and
[Down]
). As a
result of this actuation, the main menu is activated and the first entry (Date / time) is
displayed.
The control menu can be exited by actuating the upper
[Reset]
the main menu was active.
An activated control menu is exited automatically if no further input occurs for
30 seconds. The display then always changes automatically into the basic state of
the message display.
Fig. 66: Events
Fig. 67: Scrolling through messages
Fig. 68: [Reset] button
Display and control elements
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US
69
