For the set values to become effective,
they must be adopted
([Reset PS] button arrow).
8.7
Inside temperature
In the menu function "Inside temperature measurement", the current measured
value of the inside temperature of the system is determined cyclically and is shown
with the set limit values "Minimum temperature" and "Maximum temperature"
Chapter 8.12.5 “Inside temperature” on page 86
.
INFORMATION
If the maximum permissible temperature is exceeded or if the temperature falls
below the minimum permissible temperature, a failure message results as the
system may be damaged. In this case, it must be inspected by the manufacturer.
Has no function
Exit display
Has no function
Exit display
8.8
Lamp test
All of the display’s segments are triggered black and all of the LEDs are switched on
continuously.
Exit test display
Exit test display
Exit test display
Exit test display
The lamp test is exited by actuating any button. The lamp test is exited automatically
if no button is actuated for longer than five seconds.
8.9
Menu "Version information"
Control function "Query Firmware version":
Previous submenu
item
Return to main
menu
Next submenu item
Select function
Fig. 76: [Reset PS] button
Display and control elements
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US
77
