INFORMATION
This configuration only has to be performed for component assemblies with a pro-
duction date prior to July 8, 2014 ( "Network Interface NW" card with component
assembly numbers prior to 0214 and from 0214-0001 up to and including
0214-0349).
If the system is no longer to be recognized following USB configuration, then config-
uration has to be performed again. Configuration is then only possible if the mainte-
nance program displays "No device connected".
Time
● Read out time: Reads the time out of the CPU of the system and displays it in
the
“time”
and
“date”
fields.
● Set date/time: Writes the values from the
“time and date field”
into the CPU of
the system.
● System time: Sets the
“time”
and
“date”
fields to the PC system time.
● Time/date field: Defines the time that is to be written into the system by means of
“Set date/time”
. Manipulations of these fields do not become effective until the
“Set date/time”
button is clicked.
Maintenance program
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US
98
