3.11
Signage
L
WARNING
Risk in conjunction with illegible signage!
Over time, stickers and signs can get dirty or become illegible for other reasons, so
that risks can no longer be recognized and necessary operating instructions can no
longer be adhered to. This will lead to a risk of injury.
● Keep all safety, warning and operating instructions easily legible at all times.
● Immediately replace damaged signs or stickers.
Marking of the extinguishing zone
The operator must mark the extinguishing zone/control cabinet with the warning sign
"Gas-based extinguishing system – Danger to health!"
1)
to the presence of the system and its associated dangers.
Fig. 2: Marking of the extinguishing zone (example)
1)
Included in the scope of delivery.
3.12
Environmental protection
NOTICE
Danger to the environment due to incorrect handling of materials that can
harm the environment!
In case of incorrect handling of materials that can harm the environment, especially
improper disposal, there can be significant damage to the environment.
● Always observe the notes below about the handling of materials that can harm
the environment and their disposal.
● If materials that can harm the environment accidentally escape into the envi-
ronment, take suitable measures immediately. In case of doubt, inform the
responsible authority about the damage and ask what suitable measures to
take might be.
Safety
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US
23
