For the set values to become effective,
they must be adopted
([Reset PS] button Fig. 69/1).
8.5
Reviewing the event memory
The display of messages from the event
memory is identical to the system’s mes-
sage display. To signal that it is a display
from the memory, the text
“EMEM”
is over-
laid in the upper right section. In contrast to
the message display, messages are also
entered in the event memory if a state,
which leads to a message, is offset again.
The representation of the outgoing message is either with a corresponding different
text message (Fig. 70) or with the same message and the addition of the symbol
for the outgoing message (Fig. 71).
The number of the message is the number
in relation to the start of the current event
memory that is present. This means that
the oldest event that is still in the memory
has the number 1. If the event memory is
full, the next event will overwrite the hith-
erto oldest event. In the next display of the
event memory, the event which previously
has the number 2, now has the number 1 (the saved events move downward so that
the new event can be added at the top). The numbering in the event memory does
not in any way relate to the number that was shown for the event in the message
display when the event was still current.
In the event memory display, it is possible to move from any event to the temporally
oldest event by simultaneously pressing the
[Up]
and
[Down]
arrows. Similarly, the
[Reset PS]
button always leads to the temporally most recent event. If the respective
arrow button is pressed longer when scrolling, the display proceeds automatically in
the chosen direction for as long as the button remains pressed.
Display, if there are no entries in the event memory:
Exit display
Exit display
Exit display
Exit display
Display of the most recent event:
To previous menu
item
Exit display
Has no function
Has no function
Fig. 69: [Reset PS] button
Fig. 70: Outgoing message 1
Fig. 71: Outgoing message 2
Display and control elements
Operating Instructions / DET-AC III Master / 916005 / 11-2022 / en_US
72
