7 Maintaining the machine
Ritta l electrical crimping machine R8 E
We reserve the right to make technical m odifications.
23
EN
◼
Press the transport pin upwards.
◼
Remove the belt.
◼
Loosen the screw with an Allen key size 4 (see fig. 20, item 1).
◼
Remove the magazine at the top (see fig. 20, item 2).
Fig. 20:
Magazine
◼
Remove the two screws with an Allen key size 2.5 (see fig. 21, item 3).
◼
Remove the separating blade cover (see fig. 21, item 4).
◼
Replace the ferrule separating blade (see fig. 21, item 5).
Fig. 21:
Replacing the ferrule separating blade
The installation is performed in the reverse order.
◼
Observe the installation position of the ferrule separating blade.