8 Troubleshooting
24
We reserve the right to make technical modifications.
Rittal electrical crimping machine R8 E
EN
Fig. 22:
Ferrule separating blade installation position
◼
Install the magazine.
–
Fig. 23:
Installing the magazine
◼
Ensure that the upper edge is flush!
8
Troubleshooting
Warning!
Electrical shock caused by working on live components!
◼
Before working on the machine, it must be disconnected from
the power grid.
8.1
Personnel for troubleshooting
Faults may the rectified only by trained personnel (fitters) and qualified electri-
cians.
8.2
Machine does not start
Cause
Correction
The power supply is interrupted.
◼
Check the mains cable and the fuses.