Data Television Adapter
(DTA)
Quick Reference
Remote Functions & Setup
TV Input*
Toggle TV Input
Info
View the channel name &
number, date & time
Page Up
For future use
Menu
Display the Main Menu
OK
Select a highlighted item within
Menus, Display channel name
& number, date & time
Volume
Audio up & down
Guide
For future use
Yellow A
Toggle to secondary language
(if available)
*TV must be programed
with the remote
LED Indicator
Bottom press & special
Command indication
TV Power*
Turn your TV on or off
Last
Return to the previous channel
or menu
Exit
Return to watching TV
Page Down
For future use
Channel
Channel up & down
Mute
Sound on & off
0 (Zero)
Diagnostics
Setup
Program your remote control
to the set-top box & TV
1
Press and hold Setup button
until the LED Indicator turns
green, then release.
2
Press the “Menu” button.
3
Proceed by entering the
pairing code.
If you don’t see a pairing code
screen, repeat steps 1 and 2.
To dismiss this and return to the
menu, press the “Exit” button.
Remote Pairing Instructions
Remote Programming Instructions
If you wish to program your remote to control TV functions like TV input,
click here for remote programming instructions.
Pairing your DTA remote to a DTA box means the two pieces of
equipment are linked and will only work with each other. The benefit of
doing this is to allow the remote control to be pointed in any direction
and the DTA box will still get the signal you select by pressing the
button. However, if you do not choose to pair your DTA remote to
your DTA box, the remote control will still work, but you will simply be
required to point it directly at the DTA box for it to receive the signal.
