10
www.rivatech.de
4. INSTALLATION
4.1. Using a lens
To have the full resolution of a megapixel camera, use a megapixel lens with manual
iris. Installing a standard definition to a megapixel camera may create poor image
quality.
If a camera with a high zoom lens is subjected to an environment with temperature
variation (approximately 10
˚
C, but dependable on the zoom level), there may be a
focus shift causing a blurry image. Make sure to consider the installation environment
when you use a high zoom lens.
To install a C/CS mounting lens,
1. Remove the protective rubber cap from the front of the camera.
2. Install the mount ring for lens and adjust the mount ring to fit C or CS lens.
3. Tighten the setscrews using the hex wrench in the package.
CW
SET SCREW
Set Screw
CCW
CW
*Lens is optional.
