RTC Series
RTC Installation Guide
01A.04
16
5.3. Reset
Reset can be carried out as follows:
1.
Use a pointed object to push the reset button for 1~2 seconds.
2.
Wait for the system to reboot.
5.4. Factory Default
Resetting the device to the factory default will reset all configured parameters to
the initial factory settings. To perform the Factory Default settings:
1.
Use a pointed object to push the reset button and hold for 5 seconds. The
orange LED turns off while green LED flashes.
2.
Once the green LED becomes solid, release the reset button.
3.
Wait for the system to reboot.
The factory default settings are:
IP address:
192.168.xx.yy
Network mask:
255.255.0.0
Gateway:
192.168.0.1
User ID:
root
Password:
pass