WARNING: ALWAYS TURN CONTROL TO “OFF” THEN DISCONNECT PLUG
FROM WALL OUTLET BEFORE DISCONNECTING
SureRELEASE
™
CORD.
CAUTION:
• Do not immerse cord sets in water or any liquid.
• Do not attempt to defeat the detachable magnetic
SureRELEASE
™
cord system by trying to permanently attach cord set to product.
• Do not stick pins or other sharp objects in holes on
magnetic cord set
• Do not use any type of steel wool to clean magnetic contacts.
1. Unplug from outlet and allow unit to cool completely.
2. Remove
SureRELEASE
™
magnetic cord from the fryer socket.
CAUTION: Do not use abrasive pads or alcohol.
3. Clean the outside of the fryer and LID with a
damp cloth.
4. Remove FRYING BASKET. Wash the FRYING BASKET in hot soapy water. Rinse
and towel dry carefully.
5. Store your fryer with the LID closed to preserve the oil.
6. When changing the oil, take the opportunity to clean the inside of the fryer.
Remove LID, pour out oil and discard properly; wipe the inside with paper
towels to absorb excess grease. Wash interior of fryer with hot soapy water.
Rinse and dry thoroughly.
CAUTION: Never immerse the fryer in water, or wash in running water.
NOTE: A REMOVABLE CONDENSATION TRAP is located on the back of the
fryer. The CONDENSATION TRAP will collect any water that has condensed on
the inside of the LID when the LID is opened after frying. Remember to empty
and clean the CONDENSATION TRAP after each use. To clean simply rinse
with warm water.
-7-
HOW TO CLEAN YOUR FRYER
