-8-
TO REMOVE AND REPLACE LID
• To remove lid, depress LID RELEASE BUTTON and lift LID
to a vertical position. Remove LID by pulling firmly
upwards (Fig. 3). Reverse the sequence to secure lid
back into position. Be sure to push down firmly on lid
from the vertical position to secure back in place. When
replacing LID, the spring on LID must be inserted down
in front of the metal clip that is located on the fryer
housing. NOTE: Always remove LID before emptying
the OIL RESERVOIR or cleaning. CAUTION: Ensure that
lid is in place and secure prior to operation of unit.
REPLACING AND CLEANING FILTERS
1. Open the FILTER COVER.
2. FOAM GREASE FILTER may be washed in hot soapy water. Allow to air dry.
3. Clean the inside of the cover with a damp soapy sponge. Rinse and dry
thoroughly.
4. Insert CHARCOAL ODOR FILTER on the bottom of LID, followed by clean
GREASE FILTER, then replace FILTER COVER.
NOTE: For replacement charcoal odor or grease filters, order through our
website at www.rivalproducts.com or by mailing a check for $7.99 plus $6.00
for shipping and handling (MA add 5% sales tax and TX add appropriate sales tax)
payable to:
Rival
P.O Box 769
Milford, MA 01757-0769
HOW TO CLEAN YOUR FRYER (CONTINUED)
Figure 3
