G
ETTING
S
TARTED
G
UIDE
49
2
I
NSTA
LLI
NG
AND
D
EPLO
Y
IN
G
S
T
EELHE
AD
M
OBI
L
E
5. Connecting to the Mobile Controller
Plug the serial cable into the Console port and a terminal.
Make sure the Console port settings are: 9600, 8 data bits, no parity, 1 stop bit, no flow control.
Start your terminal emulation program (for example, HyperTerminal or Tera Term Pro).
At the login prompt, type
admin
. The default password is
password
.
6. Configuring the Mobile Controller
The configuration wizard automatically starts when you log into the command-line interface for the
first time.
Follow the prompts to configure network and in-path interface settings for the Mobile Controller.
Confirm your settings; then type
exit
to log out of the system.
7. Connecting the Mobile Controller to Your Network
Plug the straight-through cable into the Primary port of the Mobile Controller and the LAN switch.
This can be any port on your LAN switch that is configured to connect to a host.
Check the LED status lights to verify that the appliance is connected properly.
8. Logging into the Mobile Controller
Enter the URL for the Mobile Controller in the location box of your Web browser:
http://host.domain
or
https://host.domain
The Mobile Controller appears, displaying the Welcome page.
In the Account text box, type
admin
.
In the Password text box, type the password you assigned.
Click
Login
to display the Home page.
