SteelConnect SDI-5030 Gateway Hardware Installation Guide
35
Replacing network interface cards (NICs)
Replacing SteelConnect Gateway SDI-5030 Components
5.
Align the fan assembly mounting holes with pins on the chassis base and push down until it is firmly
seated.
Figure 3-17. Installing the fan assembly
6.
Attach the fan cable to the fan connector on the server board.
7.
Replace the chassis cover.
Replacing network interface cards (NICs)
To install or replace a NIC
1.
Power down the gateway and remove the power-supply cord.
2.
Remove the cables connected to the gateway.
3.
Remove the gateway from the mounting rack, if necessary.