SteelConnect Access Point Hardware Guide
11
2
Mounting the SteelConnect Access Point
Appliances
This chapter describes how to install or mount the access point appliances and discusses the following
topics:
“Site Preparations or Considerations” on page 11
“Mounting the SDI-AP3 and SDI-AP5” on page 12
“Installing the SDI-AP5R” on page 13
“Connecting Power” on page 17
“Connecting to the Network” on page 17
“Connector Requirements” on page 17
Site Preparations or Considerations
“Safety Information” on page 11
“Environmental Considerations” on page 12
“Wall Mounting the SDI-AP5R” on page 13
“Pole Mounting the SDI-AP5R” on page 15
Safety Information
Do not attempt to service the appliance. This sealed unit contains no user-serviceable parts or
adjustments. Do not open or tamper with the power supply.
Carefully inspect the work area in which the SDI-AP3 and SDI-AP5 appliances will be located to
ensure against hazards such as damp floors, ungrounded power extension cords, and missing
ground connections.
Before operating the appliance, ensure that external power sources comply with the requirements.
Ensure that the ampere rating of all equipment plugged into wall outlets does not exceed the
capacity of the outlet.
If you require an extension cord, ensure that the ampere rating of all equipment plugged into the
extension cord does not exceed the cord’s ampere rating.
If the SDI-AP3 and SDI-AP5 appliances are exposed to moisture or condensation, disconnect it
from the power source immediately and obtain service assistance.
Summary of Contents for SteelConnect SDI-AP3
