RIVERBED WHITEWATER QUICK START GUIDE
© 2012 Riverbed Technology. All rights reserved.
24
Testing Tivoli Storage Manager with Whitewater
Method 1: Whitewater Used as a Primary Storage Pool
Note: This test applies only if you configured Whitewater as a primary storage pool for backups from a policy domain. If you
configured Whitewater as the next primary storage pool in a storage pool hierarchy, go to Method 2 below. If you configured
Whitewater as a copy storage pool, go to Method 3 below.
Note: It is not generally recommended to set the Whitewater gateway as the direct destination for TSM backup policies,
due to the sequentially designed nature of Whitewater appliances, and the additional network requirements to perform
backups to TSM and data movement to Whitewater simultaneously.
1. To test Tivoli Storage Manager with the Whitewater gateway you can run a manual backup. Start the Tivoli Storage Manager
Backup-Archive GUI, and when the window appears click on
Backup
. In the Backup window that appears select the local drives
or files to backup, and click
Backup
to begin the operation
(Figure 25)
.
Figure 25 Initiating a Manual Backup
2. Backup activity will be provided in the Task List window, as shown in Figure 26. By clicking the
Report
button you can view
detailed status of the operation, including throughput metrics and object counts (Figure 27).
Figure 26 Task List Status