5
O
STEP 12
1.
Place drawing with hole positions on wall in desired position and drill 2 holes.
2.
Insert 2 plastic anchor (N) into holes on wall and attach cabinet in place by inserting 2 long screws (O)
through holes on upper section cross bar (5) and tighten into plastic anchors (N) in wall.
STEP 13
1.
Insert 4 shelf holders (K) into holes on upper left side panel (4) and upper right side panel (3).
2.
Make sure 4 shelf holders (I) are at same height.
3.
Place adjustable shelf (12) onto shelf holders (I).
N
O
3
12
K
3
