STEP 3
1.
Attach right support board (13) to upper right side panel (3) by inserting wood dowels (A) into dowel holes
and inserting cam bolts (small-B) into cam lock holes on upper right side panel (3).
2.
Insert 3 cam locks (small-C) into cam lock holes on upper right side panel (3) and rotate clockwise to secure
cam bolts (small-B) in place.
3.
Repeat above steps to assemble upper left side panel (4) and right support board (14).
STEP 4
1.
Screw 2 cam bolts (small-B) into pre-threaded holes on upper left side panel (4) and upper right side panel (3) .
2.
Insert 8 wood dowels (A) into dowel holes on upper left side panel (4) and upper right side panel (3).
3.
Attach upper section cross bar (5) to upper left side panel (4) by inserting wood dowels (A) into dowel holes
on the upper section cross bar (5).
4.
Attach shelf (6) to upper left side panel (4) by inserting cam bolt (small-B) and wood dowels (A) into holes on
shelf (6), then insert 1 cam lock (small-C) into cam lock hole on shelf (6) and rotate clockwise to secure cam
bolt (small-B) in place.
5.
Attach upper right side panel (3) to upper section cross bar (5) and shelf (6) by inserting wood dowels (A) into
holes on upper section cross bar (5), shelf (6) and inserting cam bolt (small-B) into holes on shelf (6).
6.
Insert 1 cam lock (small-C) into cam lock hole on shelf (6) and rotate clockwise to secure cam bolt (small-B) in
place.
