background image

Check for parts online at 

www.HuntRiversEdge.com

 or call 800-345-6007 M-F 8-5

19

Operator's Manual

BOWMAN XT Ladder Stand

Portable ground blinds take a beating from the sun, wind, rain and snow.  

Colors fade, materials rot, poles break and fabric tears. The Landmark 

Permanent Blind was designed and constructed to resist the elements year 

after year. The durable steel frame is covered in marine-grade reinforced 

synthetic tarpaulin, made from the same rugged materials used in pick-up 

truck tonneau covers. The window configuration allows you to precisely 

control gap vertically, horizontally or both. If you’re looking for an affordable 

year-round hunting blind with enough room for group hunts and archers, the 

Landmark Permanent Blind is for you.

All climbing aids are not created equal. For starters, Bigfoot 

Climbing Aids feature extra-large rungs that a hunter can 

place two feet on the same level.  Next we use a permanent 

anti-slip coating called Tractionite. Our assortment of 

climbing aids securely attach to the tree using a cam straps 

or ratchet straps. We take immense pride and satisfaction 

in knowing that our designs consistently gain praise from 

hunters and outfitters who recognize the little differences.  A 

big hunt should never be ruined over a little climb!

CLIMBING SYSTEMS

OTHER GREAT PRODUCTS BY RIVERS EDGE TREESTANDS

The Lockdown series of Ladder Stands are designed to lock 

it down from the ground, using crossing security straps 

installed on the ground before you ever climb, dual tree 

blades, and oversized ratchet straps. The Lockdown series 

boasts awesome hunter inspired features such as high 

strength octagonal tubing, flip up TearTuff seats, adjustable/

removable vinyl dipped shooting rails, as well as silent ladder 

pockets for an added sense of stability, safety and silence.

Summary of Contents for BOWMAN XT





















Reviews: